HR8900101L Universal Hydraulic Clutch conversion kit.
Special feature: Convert older model cable-clutch off-road machines to a hydraulic clutch. Comes with an assortment of hardware to adapt this to about any machine. With this design, the slave cylinder does not have to be mounted in direct line with the clutch arm on the engine. The flexible cable housing allows for multiple positions of the slave assembly for the best fit. Also included are two levers. A long lever blade for trials and MX applications, and a short blade for use with hand guards.
Master cylinder kit is part number BT27722208
(Other kits and parts, see below)
Suggested retail price. $249.00
Click on image to enlarge.
HR8910161 Slave cylinder, 17.5 mm
This is the replacement part for the (ABOVE SHOWN) Universal Hydraulic Clutch conversion kit part number HR8900101L.
HR8910961 Rebuild kit for above Slave cylinder, 17.5 mm
This is the rebuild kit for the (ABOVE SHOWN) Universal Hydraulic Clutch slave cylinder that is part number HR8910161 (shown above).
This kit is a component of the Universal Hydraulic Clutch kit which is part number HR8900101L.
BE250022211 Clamp for AJP master cylinders. OEM on GASGAS Trials and Enduro machines since the year 2000. Direct Replacement for the cast aluminum original to 1992. Fits clutch or front brake. Fits all trials machines with AJP controls. (Does not fit GASGAS Pampera, or GASGAS Enduro front brake.)
Click on image to enlarge
BE25622050 Kit, Clutch slave cylinder. OEM GASGAS (2 stroke) ENDURO and MX 200, 250, and 300. Also the 300 Quad 1996~2007
(Fits clutch slave cylinder number ME25632026. GASGAS ENDURO engine. Does not fit the trials, the Pampera, or the 125cc EC~MX model.)
The repair kit for the tried and true original GASGAS ENDURO AND MX clutch slave cylinder. GASGAS pioneered the hydraulic clutch and revolutionized the industry.
Click on image to enlarge.
BIT50022208 Kit, Clutch master cylinder. (12mm bore) GASGAS 50cc "BOY"
Click on image to enlarge.
BS25722208 Kit, Front Brake master cylinder. (12mm bore) GASGAS Pampera 2002~2006
Click on image to enlarge.
BS25722209 Kit, Clutch master cylinder. (9.5 mm bore.) GASGAS Pampera 2002~2006
Click on image to enlarge.
BS25722211 Clamp, master cylinder. GASGAS Pampera ONLY 2002~2006
Fits master cylinder numbers: BS25722008 and BS25722009
Click on image to enlarge.
BT27722208 Kit, Clutch or Front brake master cylinder. (9.5 mm bore.) DOT4 Type. OEM GASGAS 1997~2004 ALL Trial models, and the UNIVERSAL HEBO HYDRAULIC CLUTCH KIT HR8900101L.
Fits most other brands of Trial machines with AJP controls.
Click on image to enlarge.
BT27722210 Cap Kit, Clutch or brake master cylinder. DOT4 Type. OEM GASGAS 1997~2004 ALL Trial models, Also GASGAS Pro front brake only.
(Note: Does not fit special RAGA Pro model front brake, or GASGAS Pro model clutch. For Pro and Raga applications, see BT280222210 DOT4 type or BT28022210 Mineral Oil for clutch. For 1992~1996 type, see part number R346010. )
Fits most other brands of Trial machines with small body AJP controls.
Click on image to enlarge.
BT27722212 Special "banjo" bolt. OEM GASGAS with Hydraulic Clutch 1997~2004 all models with rear lower exit type master cylinders.
Allows for better hose connection to handlebar clearance on some applications. Standard European 10 X 1.0 mm thread size. Fits most brands of Trial motorcycles.
Click on image to enlarge.
BT280022065 Brake pad set, (4 piston HEBO Caliper), OEM front and/or rear on GASGAS TXT 1999~2003. (Original number was BT27922065) Also fits OEM rear brake on the 2002~2006 GASGAS Pampera. (Does NOT fit the GASGAS "Pro" model) Fits only the HEBO brand caliper.
AMA LEGAL.
Fits caliper part numbers: BT27922000 and BT29722001
Click on image to enlarge.
BT280222065 Front brake pad set (4 piston caliper), OEM GASGAS TXT Pro 2002~2007, and most other manufacturers.
AMA LEGAL. Fits our most popular front caliper.
Fits AJP caliper part number BT280222000
Click on image to enlarge.
BT280222068 Rear brake pad set (2 piston caliper), OEM GASGAS TXT Pro 2002~2007, and most other manufacturers.
AMA LEGAL. Fits the latest version of the AJP rear TRIAL caliper.
Fits AJP caliper part number BT280222001
Click on image to enlarge.
BT280222201 Caliper 4 Piston Kit, Front brake GASGAS Pro. OEM GASGAS Pro 2002~2007 Also other manufacturers.
(Note: This kit fits front 4 piston caliper number BT280222000)
Click on image to enlarge.
BT280222202 Caliper 2 Piston Kit, Rear brake GASGAS Pro. OEM GASGAS Pro 2002~2007 Also other manufacturers.
(Note: This kit fits rear 2 piston caliper number BT280222001)
Click on image to enlarge.
BT280222209 Kit, Small Body "Racing" Clutch and front brake master cylinder. (9.5 mm bore.) DOT4 Type.
Front brake on GASGAS Pro Raga special edition 2004~2007. Clutch on GASGAS Pro 2002~2004 (except 2004 special Raga edition with mineral oil clutch.)
(Note: Does not fit special RAGA Pro model clutch system with mineral oil. For MINERAL OIL TYPE in GASGAS Pro clutch applications, see BT280422209)
Fits most other brands of Trial machines with DOT4 AJP small body clutch or brake controls.
Click on image to enlarge.
BT280222210 Cap Kit, "RACING" type Clutch or Front brake master cylinder. DOT4 Type. OEM clutch side GASGAS Pro Trial models 2002~2004 with DOT4. Front brake on GASGAS Pro Raga 2004~2007 All front brake applications with small body "racing" master cylinder.
Fits most brands of Trial machines with AJP controls. Fits master cylinder numbers: BT280222008R and BT280222009.
Click on image to enlarge.
BT280222220 Kit, Rear brake master cylinder GASGAS Pro. (9.5 mm bore.) OEM GASGAS Pro 2002~2007 Also other manufacturers.
(Note: This kit fits rear master cylinder number BT280222010)
Click on image to enlarge.
BT280410016 Rear brake fluid reservior. (angle exit) OEM GASGAS Pro 2004-07
AMA legal, 6mm bolt hole for mounting, angled exit tube.
Use with rear master cylinders part number BT280222010 andR350100.
Click on image to enlarge.
BT280422209 Kit, Small Body "Racing" Clutch master cylinder. MINERAL OIL ONLY. (9.5 mm bore.) OEM GASGAS Pro Raga model 2004~2007, and GASGAS Pro 2005~2007 using mineral oil clutch.
(Note: Does not fit models using DOT4 brake fluid. Rubber compound is different. For front brake and DOT4 clutch applications, see BT280222209 )
Fits most other brands of Trial machines with AJP small body clutch control using mineral oil.
Click on image to enlarge.
BT280422210 Cap Kit, Clutch master cylinder. Mineral oil ONLY. OEM GASGAS Pro Raga model 2004~2007, and GASGAS Pro 2005~2007 using mineral oil clutch.
(Note: Does not fit models using DOT4 brake fluid. Rubber compound is different. For DOT4 application, see BT280222210 )
Fits most other brands of Trial machines with AJP small body controls using mineral oil.
Click on image to enlarge.
L200010 Rear brake fluid reservior.
AMA legal, 6mm bolt hole for mounting.
Use with rear master cylinders part number BT280222010 andR350100.
Click on image to enlarge.
M01060000 Bleeder "banjo" bolt. OEM GASGAS with Hydraulic Clutch 1992~2007 all models including Enduro, and Pro.
Standard European 10 X 1.0 mm thread size. Fits most brands of Trial motorcycles on clutch and some brake applications.
Click on image to enlarge.
M01059000 Kit, Clutch slave cylinder. OEM GASGAS 1992~2003
(Also GASGAS Pampera 1996~2006)
(Fits clutch slave cylinder number M01050000. First generation GASGAS engine. Does not fit the "Pro" model)
The tried and true original GASGAS clutch slave cylinder. GASGAS pioneered the hydraulic clutch and revolutionized the industry. This is the latest version with the spring and seal updates. Will improve clutch performance on older Pre 1995 GASGAS machines.
Click on image to enlarge.
R235000 Front and/or rear brake pad set (2 piston caliper), OEM GASGAS 1990~1998, and most other manufacturers.
AMA LEGAL. AJP and BREMBO brand 2 piston TRIAL caliper.
Also known as the "065" pad. Fits many 1980s and 1990s Aprilia, Beta, Fantic, Mecatecno, Merlin, Montesa, Scorpa, and Sherco with AJP or Brembo brand two piston calipers.
Fits caliper part numbers: R230001, R240004, and BT27722001
Click on image to enlarge.
R260001 Kit, 2 Piston Caliper. (Original number was R250001) Front and/or rear brake GASGAS. OEM GASGAS all Trial models 1991~1998.
(Note: This kit fits 2 piston caliper number R230001, BT27722000 and most older trial machines using the two piston AJP caliper. May also fit BREMBO brand two piston caliper. Compare dimensions for Brembo application.)
Piston dimensions: 31.8 mm O.D. X 12.85 mm W.
Click on image to enlarge.
R346000 Kit, Clutch or Front brake master cylinder. (9.5 mm bore.) DOT4 Type. OEM GASGAS 1993~1996 ALL Trial models, and Pamera. Also clutch on early GASGAS enduro applications.
Fits most brands of Trial machines with AJP controls previous to 1997. Fits master cylinder number R340001 and R345000.
Click on image to enlarge.
R346010 Cap Kit, Clutch or brake master cylinder. DOT4 Type. OEM GASGAS 1993~1996 ALL Trial models. Also fits the rear on the GASGAS Pampera 2005/06 with integral reservoir master cylinder..
Fits most brands of Trial machines with AJP controls previous to 1997. Fits master cylinder numbers R340001, R345000, and BEP250422010.
Click on image to enlarge.
R350003 Kit, early AJP type. Used in the late 1980s, and early 1990s. (11.0 mm bore)
This is a rare kit, but we have it in stock! (11.0 mm X 46.5 mm)
Click on image to enlarge.
R350004 Kit, BREMBO Rear brake master cylinder. (11.0 mm bore.) OEM GASGAS 1990~2004
Fits most trial machines with BREMBO brand rear brake master cylinder.
(Note: This kit fits rear master cylinder number R350100)
Click on image to enlarge.